MegaJolt Installation in a Tiger Cat E1, 2lt Ford Pinto engine
Home |  Required parts |  Assembling the board |  Enclosure |  Engine loom |  Installation |  Maps |  Costs |  Links

Costs

Below is the breakdown of everything needed for my installation. All prices are in GBP (£) and include taxes (VAT). Also, items marked with a * are unique to my particular installation.

Item Source Part No. Cost
Megajolt components including board and processor Bill Shurvinton N/A £35.00
Hammond aluminium enclosure Radio Spares 458-0752 £6.93
Molex connector (5 of as that's the minimum order!) Radio Spares 447-5931 (x5 of) £1.45
Zetec coil pack Scrap yard (L-reg Ford Orion) N/A £5.00
EDIS module Scrap yard (L-reg Ford Orion) N/A £5.00
VR (crank) sensor Scrap yard (H-reg Ford Fiesta) N/A £3.00
Throttle Pot Exchanged for a Molex connector (L-reg Ford Mondeo) N/A £1.45
HT lead to suit coil pack and Pinto plugs* Donington Kit Car show N/A £5.00
Omex 140mm 36-1 Toothed wheel Vulcan Engineering N/A £29.38
Shift light (10mm LED) and resistor Radio Spares 260-9851 &
131-081
£2.27
Various wiring bits Vehicle Wiring Products N/A £5.00
Various postage costs RS, VWP, Bill, Vulcan N/A £18.88
TOTAL COST : £118.36
 

All content copyright 2004 - Matt Dearden