MegaJolt Installation in a Tiger Cat E1, 2lt Ford Pinto engine
Home |  Required parts |  Assembling the board |  Enclosure |  Engine loom |  Installation |  Maps |  Costs |  Links

Home

Welcome to the MegaJolt Jr. Lite section of my website. Here you'll find details of my MegaJolt installation as well as details of how to source all the parts and build one yourself.

The engine I've implemented this on is a 2 litre Ford Pinto engine from a Sierra. The engine is totally standard except for the Weber twin 45 carbs.

Thanks to

Bill Shurvinton for supplying all the parts to make the ECU.
Keith Hack and neighbour John for turing up a couple of bit for me.
And of course Brent Picasso for creating Megajolt!

Notes

Do note this is "work in progress" and as such I'm still tinkering with it all. I'm currently running version 2.5 of the firmware which supports interpollation and a soft cut rev limiter. Both seem to work great.

Molex Connectors
I now have 4 of these available to anyone who needs one at a cost of £2 inc postage. Just drop me an email and I'll post one off to you. Address at the bottom of the page.

Please use the links at the top of the page to navigate these pages or click here to go back to my homepage.

 
All content copyright 2004 - Matt Dearden