 |
I purchased the cap from Burton Power as they were
as "cheap" as anyone (part code CAP3SF). Unlike the
standard cap, this new one does not have a breather
attachment so I needed to purchase one of those too
(The red anodised thing).
|
 |
The hole for the original filler was too small for the
new one so needed to be enlarged. I also filled the
holes with P40.
|
 |
The rubber tube that attaches the filler to the fuel tank
needed to be shortened as the new filler has a longer
neck. Here's the final result which looks so much nicer
than the old one. Shame it has to be mounted so high,
but that's were it has to go as the neck from the tank
dictates the filler's location.
|
